Fig. 33-A Pilot Snap Lever Sight Feed Oiler -
With snap filler opening
Careful design has made this oiler the choice for first rate machinery and engines. Clean lines and handsome construction are the marks of this strong and substantially built oiler. Simple in operation with few moving parts lowering the risk of malfunction, this compact device resists high levels of vibration, offering greater durablity and longer life.
Size No.
00
0 1
1-1/2
2
3
4
5
6
7
Outside
diameter
of glass		 1-1/8" 1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
3-1/2"
4-1/4"
Height
of glass
1"
1-1/8"
1-3/8"
1-5/8"
1-7/8"
2-1/8"
2-3/8"
3"
4"
5"
Shank
pipe
thread
1/8"
1/8"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
3/4"
Capacity,
ounces
1/2"
5/8
1
1-1/2
2-1/2
4
5
10
Pint
Quart
Fig. 77 Hydro Glass Body Sight Feed Oiler -
For gas, gasoline or oil engines, blowers, etc.
Our glass body gas engine lubricator is designed to feed oil directly into the cylinders of gas engines. The bent tube, shown within the cup, conveys pressure to the upper part of the body, where it equalizes pressure on the oil, allowing gravity to feed the oil.
Regulation of the feed is accomplished by the turning of a knurled adjusting nut. Oil feed is started and stopped by raising or lowering a snap lever. Shanks are fitted with ball check to prevent oil from blowing back.
Size No.
1-1/2
2 3
4
5
6
7
Outside diameter of glass 1-3/4" 2"
2-1/4"
2-1/2"
3"
3-1/2"
4-1/4"
Height of glass
1-5/8"
1-7/8"
2-1/8"
2-3/8"
3"
4"
5"
Shank pipe thread
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
3/4"
Capacity, (oil)
1-1/2 oz.
2-1/2 oz.
4 oz.
5 oz.
10 oz.
Pint
Quart
Fig. 277 (Patented) Plural Sight Feed Oiler -
Glass body with cast brass trimmings. Made with one to fourteen feeds and available with six different size reservoirs. For bearing and jounals.
Our Plural Oilers are made with one to fourteen feeds, and in 1/3 pint, 1/2 pint, pint, quart, 1/2 gallon and gallon reservoirs. Each one has a horizontal support stud, and this stud is provided with a lock nut to hold it firmly to the bracket or other support. Each feed has its own sight glass and regulating screw for independent feed adjustment. The snap lever on top of the oil reservoir starts or stops the flow of oil to all the feeds at once without disturbing the feed adjustments. The oil pipe connections are 1/4" O.D. brass tubing, unless otherwise specified.
All parts are made from brass and the construction throughout is extremely durable. There are no moving working parts to wear out and cause trouble, and with reasonable care this device will outlast the machine it lubricates.
At a slight additional charge, our Plural Oilers can be provided with an equalizing tube within the oil reservoir to enable these oilers to deliver the oil at moderate pressures.
Size No.
4
5 6
7
8
9
Capacity 1/3 Pint 1/2 Pint
Pint
Quart
1/2 Gal.
Gallon
Outside diameter of glass
2-1/2"
3"
3-1/2"
4-1/4"
5-1/2"
8-1/4"
Height of glass
2-3/8"
3"
4"
5"
7"
5"

Bodies available in glass, steel or plastic.

 

 
home | air cocks | liquid level water gauges | liquid level oil gauges | marvel self sealing washers & glass | sight feed valves
sight feed oilers & lubricators | grease & oil cups | gauge cocks | air pistols | brass fittings | contact us
site designed by the idea shop, inc.
copyright 1999, essex brass